background image

62 

 Glossary 

3004149-0001  Revision B 

 

Glossary 

APN:

 An Access Point Name (APN) provides access to an 

external network. By default, the SIM Card in your terminal is 
configured with the APN of your Service Provider. You may 
want to configure further APN’s if you have arranged with your 
Service Provider to use more than one SIM Card.  

BGAN Satellite Terminal:

 Referenced throughout this 

document as the Satellite Terminal, “The Terminal,” or UT.  
This device implements and manages BGAN satellite 
communications between your computer and Service Provider’s 
network.  

Quality of Service

: Quality of Service (QoS) assigns a level of 

priority to certain types of data traffic, in particular high 
bandwidth applications such as video and multimedia. QoS 
attempts to maintain a guaranteed throughput level, and 
minimize error rates and end to end latency, so providing a 
higher level of service than "best effort" protocols.  

DNS Server

: The Domain Name System (DNS) is an Internet 

service that is required because the Internet does not recognize 
the text-based Web address or email address that you type into 
your Web browser or email application. All or part of a Web 
address or an email address is a domain name, and DNS 
translates this domain name into an IP address that is recognized 
by the Internet. 

A DNS Server holds a database of domain names and IP 
addresses, so that when you enter a Web address or email 
address, you are directed to the correct IP address over the 
Internet. 

Ethernet:

 Ethernet is a local area networking method used 

widely throughout the computer industry. It is one of the three 
communications interfaces supported by the Satellite Terminal. 

Fault Code:

 A number which uniquely references an error in a 

hardware or software system. In the Satellite Terminal, if there is 
a fault detected, the fault code and a description are displayed in 
suitable LaunchPad windows. 

GPS:

 Global Positioning System. The GPS receiver in the 

Satellite Terminal receives signals from the constellation of GPS 
satellites. It uses these signals to determine the Terminal’s 
location on earth. That location is used during registration to 
gain access to the BGAN system. 

Summary of Contents for Hughes 9202











































































Reviews: