16
Glocom GX-9 (FB250) Operating Manual
5.
Username (UN)/Password (PW):
Username (UN)/Password (PW):
Username (UN)/Password (PW):
Username (UN)/Password (PW): Some Service Providers require a Username and Password
to be used when setting up a PDP context. This is often required when using a Static Global
IP addresses assigned by the Service provider.
Activating a PDP Context:
Activating a PDP Context:
Activating a PDP Context:
Activating a PDP Context:
To activate a PDP context, perform the following procedure:
Do not modify the CID field unless you need to setup a specific ID for one of your devices. Leaving it
blank will allow the software to automatically choose the next CID that is available.
Next, type in the local IP address of the device that you want to setup the connection for. The APN is
read from the USIM card and is usually not changed unless you have more than one APN provisioned on
the USIM card.
Next, select the QoS that is needed by selecting it from the drop down list.
If your Service Provider requires a UN and PW, enter it in the Username and Password boxes, then click
on “Apply”.
The new connection will show up in the table above (See screen shot below for example).
Background Context activated for 192.168.128.101
Background Context activated for 192.168.128.101
Background Context activated for 192.168.128.101
Background Context activated for 192.168.128.101
