![background image](http://html1.mh-extra.com/html/inkmachines/stingray-x2/stingray-x2_manual_2061835009.webp)
9
5.
Rotate the Cam
and locate the Cam screw
with a 0.9mm Allen key through the
hole in the Frame
. Loosen the Cam screw
and remove the Cam
.
6.
Clean the parts and the frame and align the flat part of the motor shaft towards the hole
in the frame.
7.
Mount the new Cam
of choice with the Cam screw
downwards so that the
Cam screw
and the flat part of the motor shaft align with each other and with the
hole in the Frame
. Make sure that the Cam
is all the way down against the
motor and tighten the Cam screw
.
8.
Put the Rod assembly
and the Shaft support
in place and tighten the Shaft
support screws
. The Shaft support
must be oriented with the clearance groove
downwards or the Rod assembly
won´t fit properly.
0.9mm Hex key
Flat part of shaft
Down