Inkel IRM-816, Operation Manuals, Page: 7 / 12

REMOTE MICROPHONE STATION 16CHANNEL
IRM-816
7
9. ALL SWITCH AND LED
If you control 16 speakers at a time, this ALL switch helps to do it easily.
If press ALL switch, LED(AMBER) of this switch is illuminated and also LED(GREEN) of 16 speakers is illuminated.
10. CHIME SWITCH AND LED
Before announcement, you can notice it with pre-announcement ( ‘ do-mi-sol-do ’ )
Only when chime switch has been pressing, LED (GREEN) is illuminated.
11. TALK SWITCH AND LED
This switch is used when you can use to microphone
Only when you want to announce, press this switch so that unnecessary noise is not occurred.
When the switch is on, LED (GREEN) is illuminated.
2 4 3 1
1. SPEAKER CONTROL TERMINAL (HOT & COM)
These terminal controls zone speaker.
It is connected to remote 1, remote 2 terminal of MATRIX (our model, IPX-8116) or
EMERGENCY CONBINATION (our model, IEC-8216).
2. LINE OUTPUT TERMINAL
As output signal terminal of this unit, it is connected to remote input jack of EMERGENCY PANEL
(our model, IEP-8251).
3. AUX INPUT TERMINAL
This terminal connects external device, such as cassette desk or CD player.
Input level is -20dB
4. DC +24V INPUT TERMINAL
It is connected to DC +24V output terminal of POWER DISTRIBUTOR (our model, IPD-8329).
Rear Panel