19
Manual Mode
Automatic Mode
DEVICE OPERATION
Press the button to enter the setting mode, and the indicator lights of
each channel are on. When setting channel one, the indicator of channel
one flashes. Press the button to cancel the manual irrigation of that
channel and enter the setting of the next channel. Press the button to
confirm the setting and advance to set the next channel. Press and hold
the button for two seconds (or no operation for one minute) to exit the
setting and return to the automatic mode.
Press the button to exit the setting and start irrigation (within 30
minutes). During irrigation, the corresponding channel indicator remains
on, and you can press the button to cancel the irrigation on this zone
and go forward to the next zone in sequence. Press and hold the
button for two seconds to stop all irrigation.
During irrigation, short press the button to immediately deactivate the
active zone and move forward to the next zone in the irrigation sequence.
Press and hold the for 2 seconds to stop all irrigation.