Enjoy your barbecue time
Choose the food type and preference for the food where each probe
Is Inserted, the app and the device will dlsplay Its current and target
temperature.
When the food is ready, the app and the device will alarm.
Options
Device Setting
_.,
Preference
Display
-.tlee-1
Probe Number
77
°
Current
"''"'''"'"
Temperature
7
70
Target
�
Temperature
�- .J ��
:<,"[
Temperature
History
Connection
Status
Timar
.,
_
Preference
Setup
The user Interface of the app may be changed when upgraded.
Please follow the instructions in the app.
Power ON/OFF
Power ON:
Press and hold the power button for 3 seconds.
Power OFF:
• Press and hold the power button for 3 seconds.
• Auto-off after 8 hours out of connection with phone.
FCC ID: 2ALANIBT-2X
This device complies with part 15 of the FCC Rules. Operation
is subject to thefollowing two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the
party responsiblefor compliance could void the user's authority
to operate the equipment.
Note; This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. T hese limits are designed to provide reasonable
protection against harmful interference in a residential
Installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
Interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
Warning
• the max temperature is D-300 C"/32" F -
sn
•
F; (Short�m• meuure
mant); 0-250/ C"32" F• 482 • F (continuous monltorlng),if exceed this
temperature, the probe and the wire be bumed-out.
Especially.do not directly put Iha wire or the probe in the burning flame
or heating
tube
• Do not submerge the probe and the wire in water for a long lime,
which may cause the Inaccurate temperature measuring.
Do not strongly squeeze the probe and the wire, which may break
the plastlc covered wire on It and cause the short circuit on the
polarity.
Remove the silicone cover on the and of the sensor before using it.
The unused BOClcets should
be
inserted well with the cover.
Teflon cable
_,.....
With stalnleH steel mesh
(Length: about 150cm / 4 .9ft)
L
Sanaor
- Non
water-proof
App Store is a service mark of Apple Inc.
Google Play is a service mark of Google Inc.
lnkbird Tech. C.L
B
@
WWW.ink-bird.com
�
Shenzhen, GD, 518000, China
CE
0
