Injoy Motion ALLIED TANK ATTACK, Setup And Service Manual

Page: 23 / 53

©2013 Injoy Motion Corp.
21
3.3 Joystick Setting (Yoke Controller Setting)
Replacing the yoke, accelerator or the brake pedal potentiometer may
refer to screen values to install. If the potentiometer values set exceed the safe
range or dead zone after installation, the screen will show the error. Please
re-set the potentiometer values within the safe range.
To calibrate the Joystick (Yoke and Machine Gun), follow the directions on
the screen and go through the steps below.
Step1. Follow the directions on the screen; Hold the “Calibrate” button on
the joystick (Gun) to calibrate the yoke, machine gun, pedal and brake.
Release the Brake and Pedal.
Step2. Follow the directions on the screen, Release the joystick (Gun),
then press “Next” button.