©2013
Injoy Motion Corp.
17
Coin Acceptor Setting
Step14
：
Pull up the slider of the coin acceptor and insert the coin into the coin
acceptor. Release the slider to fix the coin acceptor.
Step15
：
Check the Coin Acceptor Setting. (Select “NO” on top
switch, “SLOW”
on bottom
switch)
Placement for external plate
Step16
：
Put a plate on the floor and right under the drain valve hole.
The air compressor tank drains water after machine power off. So it is
suggested to put a container on the floor and right under the drain valve to
catch the water. Generally, a plastic plate around 25x20x3 cm (LxWxH) is
suggested.
Plate
Summary of Contents for ALLIED TANK ATTACK
