background image

Inis Stoves, Inis Mor 

 

User manual. 

Congratulations on the purchase of your Inis Mor 

back boiler stove. When fitted and operated 

correctly, you should enjoy many years, trouble 

free warmth from your Inis Mor stove.

 

Please read the user manual fully before operating 

the stove. 

Before you operate the stove, consult with the 

installer that all the relevant work has been carried 

out correctly and that they have ignited a small fire 

in the stove and it is operating correctly. Check 

that all relevant local, national and European 

Standards have been adhered to when installing the 

stove.

 

 

Some important points to note are, 

1.

 

This stove is not designed to operate in a 

shared flue. 

2.

 

This stove should not be used as an 

incinerator. 

3.

 

The use of petroleum based industrial fuels 

is to be strictly avoided. Do not burn 

plastics in the stove.  

4.

 

Inis Stoves are dedicated to the principal of 

using renewable fuels in all our Stoves. We 

recommend using wood fuel in the stove if 

possible. Some recommended fuels for this 

stove are below, 

A.

 

Hard or soft woods below 20%                                                              

      Moisture content 

B.

 

Peat in solid form with low 

moisture content. 

C.

 

Solid fuel, Inis stoves recommend 

D.

 

HETAS approved smokeless fuels 

in nugget form. An example is 

‘ECOBRITE’

 smokeless coal.    

 

5.

 

Never use liquid fuels to light the Stove. 

6.

 

When in operation, the stove will be hot 

and care should be taken to avoid injury. 

7.

 

When using solid fuels like smokeless coal, 

the ash pan should be emptied every day. 

8.

 

Never attempt to modify the stove in any 

way and always use genuine Inis Stove 

spare parts. 

9.

 

Never place combustible or non-

combustible materials near, in or around 

the stove that will interfere with the proper 

heat convection and air supply to the stove. 

The stove surround should be fireproof. 

Never leave the stove fuels too close to the 

stove. 

10.

 

For safe and efficient operation of the 

stove, regular cleaning of the stove and 

chimney is essential. Dirty surfaces within 

the stove will lead to poor heat transfer to 

the water and the room and will waste your 

money. 

11.

 

Care should always be taken when 

emptying the ash pans of the stove. Hot 

ashes should never be put in a plastic dust 

bin, bag or container. Ideally, empty the 

ash pans when the ashes are cold. 

 

 

 

Stove features. 

 

 

 

As per fig 1.and 2. the twin door is opened by 

turning the right side door handle anti-clockwise 

over 90 degrees. The single door version the door 

is opened by turning the handle clockwise over 90 

degrees. Although the door handles have been 

designed to be operated with bare hands, when 

burning at full output over extended periods, a 

kitchen glove is recommend 

INIS MOR

Spare Parts List

Summary of Contents for Boiler Stove














Reviews: