User’s Manual
Using the system
31
5-7
Change date
and time
This option allows you to set the date and time in accordance with the
selected format.
Via Keypad
Method 1
Activate the “Set date/time" shortcut (shortcut n.35:
) associated
with one of the following keys
to
shown on the display, with or
without code entry, to access the User Menu at the “Set date/time" section.
1. Use keys
and
to select the programming field (hour, minutes,
etc.).
2. Use keys
and
to change the value in the selected field.
3. Press
to save the setting.
Method 2
Access the “Keypad date/time" section by means of a valid PIN.
Follow the instructions described in
Method 1
.
5-8
Keypad settings
This option allows you to program the display and buzzer settings.
•
Brightness
- allows you to adjust the level of brightness of the display
backlight and LEDs, by pressing and holding the respective key for 20
seconds.
•
Standby brightness
- allows you to select the level of brightness of
the display backlight and LEDs during standby status.
•
Contrast
- allows you to adjust the black/white contrast.
•
Volume
- allows you to adjust the buzzer volume (3 levels available).
•• Off
•• Low volume
•• High volume
These settings apply only to the keypad you are working on, and will be saved
even in the event of panel shutdown.
Note
The buzzer will not emit any audible signal whatsoever.
Via Keypad
Method 1
Activate the shortcut assigned to the “Keypad sett.menu” (shortcut n.18:
) and associated with one of the following keys
to
(shown
on the display) with or without code entry, to access the "Keypad
settings”section of the User Menu.
1. Use keys
and
followed by
to select the required parame-
ters.
2. Use keys
and
to increase or decrease the value of the
selected parameter.
3. Press
to save.
1 8 : 2 3 2 0 / 0 8 / 2 0 0 8
D D D D D D D D - -
C o d e R u p e r t
V i e w
O u t p u t s O N / O F F
S e t d a t e / t i m e
Method 2.
T y p e - i n C o d e
* * * * * *
1 8 : 2 3 2 0 / 0 8 / 2 0 0 8
d d / m m / y y y y
Method 1.
B r i g h t n e s s
1 8 : 2 3 2 0 / 0 8 / 2 0 0 8
D D D D D D D D - -
C o d e R u p e r t
O u t p u t s O N / O F F
S e t d a t e / t i m e
K e y p a d s e t t i n g s
Method 2.
T y p e - i n C o d e
* * * * * *
K e y p a d s e t t i n g s
B r i g h t n e s s
BrightnessStdby
C o n t r a s t
Method 1.
