Configuration manual
Configuration
9
2.4
Access to the device modification menu
Once the Previdia Compact system has been configured it is necessary to set the parameters, or change the default
programming of the devices connected to the control panel, individually or in a group.
The Previdia Compact control panel provides a direct programming option on the control panel for its connected
devices and their logical groups (zones and output groups) without need of accessing the “Configuration” section
(
paragraph 2.3
). To access it, you must access the programming phase of the control panel (
paragraph 2.2
) and then
press the
Modify
button on the menu that appears on the screen.
The section you access will show Ia list containing the access buttons to the programming subsections::
• Zones (refer to
paragraph 4.3
)
• Output groups (refer to
paragraph 4.4
)
• I/O Lines (refer to
paragraph 4.2
)
• Loop points (refer to
paragraph 4.1
)
Icon
Function buttons
Display
Access to the configuration of the
general parameters of the control panel.
Refer to
paragraph 3.1
Access to the configuration of the
general parameters of the Inim Cloud
service.
Refer to
paragraph 3.2
.
Access to the configuration of the
extinction channel.
Refer to
paragraph 3.10
Access to the configuration of the
Ethernet network.
Refer to
paragraph 3.3
Access to the configuration of the
network.
Refer to
paragraph 3.4
Access to the configuration of the loops
(loop 1 and loop 2).
Refer to
paragraph 3.5
Access to the functions provided by the
SD card.
Refer to
paragraph 3.6
Access to the configuration of the inputs
and outputs provided by the control
panel terminals.
Refer to
paragraph 4.2
Access to the configuration of the
control panel access codes.
Refer to
paragraph 3.8
Access to the configuration of the
general parameters of the remote
communicator.
Refer to
paragraph 3.9
Access to the configuration of the
power supply.
Refer to
paragraph 5.1
Access level:3
