Air2-FD100 | © 2020 Inim Electronics S.r.l.
7
3.1 Enrolling a wireless device
3. Installation of Air2-FD100
1. Choose a suitable mounting placement.
2. Hold the base to the chosen mounting placement and mark the screw locations.
3. Insert the battery, ensure you respect the proper polarity.
4. Attach the battery cover.
5. Using the screws, secure the base and the tamper protection in position.
6. Position the detector over the base and, with minimum force, turn it clockwise until notch “A” aligns
with notch “B” (in order to attach the detector to the base); turn it still further until notch “A” aligns with
notch “C” (in order to allow the base to close the tamper microswitch).
7. Enroll the device.
3.1 Enrolling a wireless device
The enrolling procedure allows you to associate a wireless device INIM with the transceiver Air2-BS200
which acts in conjunction with the intrusion control panel.
This procedure varies depending on the control panel in use and the programming software or application:
1. Access the control panel programming.
2. Select the device to be enrolled in accordance with its type:
an input terminal, for a detector (motion detector, magnetic contact, etc.)
an output terminal, for an output device connected to a terminal of a magnetic contact Air2-
MC300
