IDS404 INSTALLER MANUAL NO. 700-277-02A ISSUED SEPT 2004 VER 1.02 15
IDS404 INSTALLER MANUAL
15. Programming Instructions
15.1 Introduction
The panel may be programmed either using the keypad or using the
up/download software. Programming the panel by means of the
keypad is explained in the following sections of this manual. For
information on programming the panel using the up/download software
refer to the manual pertaining to the software.
NOTE
:
Before commencing the programming it is advisable to
read the
Installer Manual thoroughly
15.2 Location Values
All values within a program location are displayed by the zone
indicators in binary format. The table below indicates how these values
may be read.
Table 2: Value represented by each zone indicator
1
e
n
o
Z
1
2
e
n
o
Z
2
3
e
n
o
Z
4
4
e
n
o
Z
8
To read a binary value on the keypad add the values represented by
each illuminated
LED
. The total value is the number being represented
e.g. Assume the following zone indicators are illuminated: Zone 1,
Zone 3 and Zone 4. The value would be as shown in the table below.
1
e
n
o
Z
1
3
e
n
o
Z
4
4
e
n
o
Z
8
l
a
t
o
T
3
1
