INHECO
08
Doc ID: 900113-003
July 2020
2.3.
Labels
The identification label with part number and serial number also contains important
technical indications. The electrical specification on the label must meet your local
situation. The label is placed on the side of the device. The identification label must not
be removed. If it has become illegible or falls off, it has to be replaced by a new
identification label. New labels can be ordered at INHECO. In case the label is missing
and you do not know the part number and serial number, they can also be read out with
the software (MTC/STC Demo Tool) which can be downloaded from INHECO´ login
section on
. → Trouble Shooting & Support, page 18f.
Thermoshake
1000
INHECO GmbH
82152 Martinsried / Germany
02
PN:
SN:
Input: 24V
Imax: 5,3A
7100146-A
Thermoshake
2016-09
Rev.:
Fig.2: Product labels on the device
INHECO GmbH
82152 Martinsried / Germany
1000
02
PN:
SN:
7100146-A
Thermoshake
2016-09
Rev.:
Storage and transportation conditions:
-10°C to +60°C [+14.0°F to +140°F],
10% to 80% RH, non condensing
Fig.3: Shipment labels on the package
Fig.4:
In case of an empty reservoir
refill with
32ml
INHECO Cooling Liquid only!
CAUTION!
O
verfilling may cause
malfunction of the liquid circuit!
Other lables on the product
Caution Hot