manualshive.com logo in svg

InHand VG814, User Manual

Share
Download
InHand VG814 User Manual Download Page 132

9.11 System Logs 

Method for viewing system logs:

 

Click "Administration >> System Log" to view system logs.

 

This page also provides the following operations: "Clear Log", "Download Log 

File", "Download Diagnose Data", "Clear History Log", and "Download History Log". 

History logs are those stored for extended time as specified on the "System Log" 

page.

 

The diagnose data file is encrypted, because the gateway configuration information 

is downloaded together with the diagnose data. You need to decrypt the file with 

the decryption tool provided by InHand.

 

 

The storage capacity of the gateway is limited (512 KB by default). To save all 

the logs, you need to use a remote log server (for example, 

Kiwi Syslog Daemon

). 

Set the address and port of the log server on the web page. The gateway uploads 

all the system logs to the remote log server.

 

Summary of Contents for VG814











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands