manualshive.com logo in svg

InHand VG814, User Manual

Share
Download
InHand VG814 User Manual Download Page 122

 

9.7.1 InConnect Service 

The InConnect is a simple 

“

plug & play

”

 service which builds secure remote 

networks for your machines (IPCs, servers, IP cameras, PLCs, HMIs, RTUs, 

controllers, etc.). Featuring user-friendly interfaces and simple operation, the 

SaaS (Software as a Service) based solution enables you to access your devices 

anytime from anywhere, and stay connected with your business and with the world 

–

 

especially in these challenging times when normal working routines have been 

disrupted. Support VPN networking in the way of subnet to subnet.

 

Step1: Register a user Global site 

hthttps://ics.inhandnetworks.com

 

Step2:

 

•

 

 Config Service Type "InConnect Service"

 

•

 

Server Address "ics.inhandnetworks.com" If you have already privatized the 

deployed Device Manager Cloud, fill in the private deployment server IP or 

domain name. Server Typy select "Coustomer".

 

•

 

Secure Channel , After checking, it will be transmitted with SSL encryption. 

 

•

 

Registered Account : Use step 1 registed account email address.

 

•

 

Site name and Asset Number customer defined.

 

•

 

Make sure the VG710 is connected to the Internet.

 

Summary of Contents for VG814











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands