18
Mode
Six type for options: 802. 11g/n, 802. 11g, 802. 11n, 802.
11b, 802. 11b/g , 802. 11b/g/n
802.11b/g/n
Channel
Select the channel
11
SSID
SSID name defined by user
inhand
Authentication
method
Support open type, shared type, auto selection of WEP,
WPA-PSK, WPA, WPA2-PSK, WPA2, WPA/WPA2,
WPAPSK/WPA2PSK
Open type
Encryption
Support NONE, WEP
NONE
Wireless
bandwidth
Both 20MHz and 40MHz for selection
20MHz
Enable WDS
Click to enable WDS
Disable
Default Route
Click to enable Route
Disable
Bridged SSID
Set bridged SSID
None
Bridged BSSID Set bridged BSSID
None
Scan
Click “Scan” to scan the available AP nearby
Auth Mode
Open type, shared type, WPA-PSK, WPA2-PSK
Open type
Encryption
Method
Support NONE, WEP
None
3.2.6 WLAN Client (STA Mode)
When working in STA mode, the router can access the Internet by connecting to access point.
The Router need to reboot after this operation.
Click the “Network>>WLAN Client” menu in the navigation tree to enter the “WLAN” interface.
Select “Client” for the interface type and configure relevant parameters. (At this moment, the
dialing interface in the "Network>>Dialing Interface" should be closed.)
The scanning function of the SSID is enabled only when Client is selected as WLAN interface. In
the “SSID scanning” interface, all available SSID names as well as the connection status of the
device as Client will be displayed.
Table 3-2-6 Parameters of WLAN Client
WLAN Client
Function description: Support Wi-Fi function and access to wireless LAN as client.
Parameters
Description
Default
Mode
Support
many
modes
including
802.11b/g/n
802.11b/g/n
SSID
Name of the SSID to be connected
inhand
Authentication method
Keep consistent with the access point to be
connected
Open type
