14
Time Range 1
Set time range 1
9:00-12:00
Time Range 2
Set time range 2
14::00-18:00
Time Range 3
Set time range 3
0:00-0:00
Description
Set description content
N/A
3.2.2 WAN/LAN Switch
WAN/LAN1 Port supports two types of work mode, include WAN and LAN.
Click the “Network>>WAN/LAN Switch” to set work mode
WAN supports three types of wired access including static IP, dynamic address (DHCP) and
ADSL (PPPoE) dialing.
DHCP adopts Client/Server communication mode. Client sends configuration request to Server
which feeds back corresponding configuration information, including distributed IP address to the
Client to achieve the dynamic configuration of IP address and other information.
PPPoE is a point-to-point protocol over Ethernet. User has to install a PPPoE Client on the basis
of original connection way. Through PPPoE, remote access devices could achieve the control and
charging of each accessed user.
WAN of the device is disabled by default.
Table 3-2-2-1 Static IP Parameters of WAN
WAN - Static IP
Function description: Access to Internet via wired lines with fixed IP.
Parameters
Description
Default
Shared connection (NAT)
Enable—Local device connected to
Router can access to the Internet via
Router.
Disable—Local device connected to
Router cannot access to the Internet via
Router.
Enable
Default route
Enable default route
Enable
MAC Address
MAC Address of the device
00:18:05:08:07:3D
(provided
by
InHand Networks),
provided for device
manufacturer
IP Address
Set IP address of WAN
192.168.1.29
