Ingolabs Pp1 User Manual Download Page 5

Gpstracker.net.in

 

                                                                                                                                                                                                                                                                                                                                                                             

Freedom is lost now…!

 

 

 

Chapter I Preface   

I. General   

Pp1    represents  the  perfect  combination  of  GSM  and  GPS 

technologies.  This  model,  with  its  precise  dimensions  and  compact 

appearance,  expresses  the  advanced  workmanship  in  the  GSM  and  GPS 

field.  It  is  a  typical  design  combing  communication  products  and  GPS 

services.   

As a professional security and positioning company, we will provide 

you with more and better products and services. Before using the watch, 

please spend several minutes reading this user’s manual in order to get to 

know about operation details and obtain better services.   

II. Notices   

1.

 

Please  read  this  user’s  manual  carefully  and  always  use  correct 

operation methods to prevent any possible errors.   

2.

 

This  user’s  manual  is  for  reference  only.  If  some  contents  and 

operation  steps  are  inconsistent  with  those  for  the  actual  product, 

the latter will prevail.   

3.

 

The defaulted password of this product is 0000.   

Summary of Contents for Pp1


























Reviews: