Ingolabs Pp1 User Manual Download Page 18

Gpstracker.net.in

 

                                                                                                                                                                                                                                                                                                                                                                             

Freedom is lost now…!

 

 

 

18 

The  guardian  may  send  SMS  555  plus  password  to  the  terminal  of  the 

ward,  then  the  ward  terminal  will  automatically  call  back  to  the  mobile 

phone  of  the  guardian  and  the  guardian  may  hear  the  sound  of  the 

surroundings within 10m around the ward.   

SMS format: 5550000 

Remarks:  0000  is  the  initial  defaulted  password  and  in  practice  the 

password could be set by the user. 

7. Regular Upload Interval Setup 

The  defaulted  upload  interval  of  this  product  is  0,  meaning  that  the 

defaulted GPRS is closed. The user may change the parameter according 

to actual demand. 

Command  format:  #  command  number  730#  Sampling  interval  #  Pieces 

of uploads # User password ## 

Example: 730#20#4#0000## 

Notes:  The  parameter  “20”  indicates  getting  one  point  every  20s;  after 

getting points accumulatively for 4 times, upload one piece of positioning 

information with the upload interval as 20*4=80s. The user may change 

Summary of Contents for Pp1


























Reviews: