Cleaning
Damp cloth only. Do not use solvents.
Technical specification
230/125 volts, max. 100 watts; 125/12 volts, max. 50 watts.
Halogen bulb. GY 6,35 base. Electronic safety transformer,
freely dimmable. Telescope arm 60–90 cm.
Minimum distance from combustible surfaces:
50 cm.
This symbol on the reflector means that only
low-pressure light bulbs may be used.
Any repairs that may become necessary must be carried
out by a qualified electrician.
7
6
English
English
Caution:
Do not connect the lamp to the power supply
until the assembly is completed.
Important:
The reflector is made of polished ultra-pure
aluminium. The material is very sensitive to pressure or
impact – please treat it with maximum care.
Inserting the light bulb
Important:
Do not touch the bulb with your bare hands!
On/off switch and dimmer
The light is freely dimmable via the slider control on the
transformer. The slider also serves as the on-off switch.
Caution:
The transformer must be properly ventilated.
Do not cover it or otherwise obstruct the airflow.
Adjusting the lamp
The lamp is freely tiltable in all directions via the ball-
joint (1). The telescope arm (2) can also be extended
by around 30 cm.
1
The reflector (3) is swivellable in any direction. 2
Important:
Do not turn the reflector (3) more than
180° around the axis of the telescope arm (2). Hold the
telescope arm steady while making the adjustment.
Changing the bulb
Caution:
Remove or switch off the fuse for the mains
supply and allow the lamp to cool down completely. Do
not touch the new bulb with your bare hands!
Summary of Contents for MAX KUGLER
Page 1: ...MAX KUGLER Instructions...
