Inglesina Ally Key, Instruction Manual

Page: 29 / 32

29
( C ) and on the lid ( D ).
fig. 16 When the operation is complete, reinsert the capsule ( B ) in
the silicone shell ( A ) aligning the top with the corresponding notch
on the shell.
To pair again Inglesina Ally Key to one or more Ally Pads, repeat the
configuration procedure (
from fig. 2 to fig. 7 ).
BATTERY LEVEL MONITORING
Thanks to special sound and light alarms, Inglesina Ally Key
communicates to the user a low charge level both of the battery of
the device itself and of the Inglesina Ally Pad with which it is paired.
INGLESINA ALLY KEY: DEAD BATTERY
fig. 17
In the event of a Inglesina Ally Key dead battery, the device
will emit one ( 1 ) “ BEEP ” intermittent accompanied by the coming on
of a RED flashing LED every 15 seconds until it is replaced.
INGLESINA ALLY PAD: DEAD BATTERY
fig. 18
If the Inglesina Ally Key detects a low battery charge of an
Inglesina Ally Pad paired with it, the device emits one ( 1 ) intermittent
” BEEP ” accompanied by the coming on of a YELLOW flashing LED
each 15 seconds for 5 consecutive minutes , indicating the need to
replace Inglesina Ally Pad.
The battery status of Inglesina Ally Pad is also available in the App on
your smartphone.
REPLACEMENT OF THE BATTERY OF INGLESINA ALLY KEY
If necessary, the Inglesina Ally Key battery can be easily replaced. The
device uses a
CR 2032 button cell battery .
fig. 19 To replace the Inglesina Ally Key battery, extract the
capsule ( B ) out of silicone shell ( A ).
fig. 20 Open the plastic capsule by rotating the two parts until the
notch on the base ( C ) is located at the top on the lid ( D ).
fig. 21 Once the capsule is opened, remove the battery using, for
EN