INGICS
TECHNOLOGY
Ethernet LED will be turned off and when you release the button, the iGS02E will reboot to its default
settings.
LEDs
There are two LEDs to indicate current status like the right figure. One is BLE LED and the other is
Ethernet LED. Below is their behaviors.
On
Flash
BLE LED find tag/beacon in range
BLE transmission
happening
Ethernet
LED
Network connection is built up Transmission
happening
The device quickly
blinking while power on
How to configure
iGS02E is a DHCP client by default. To configure it, you have to connect it to a router with DHCP
enabled. The first thing is to find iGS02E’s IP address in this network so that you can get into it’s webUI for
configuration. If you don’t know the IP address, you may need to use some tool to find it.(For example,
“Fing” APP in Android & iOS. Join your smartphone or tablet with “Fing” in the same network. And use it to
scan all the devices in this network)
Once you know iGS02E’s IP, enter the IP address in your browser. The default account/password are
both “admin”. You can change the password later. In web UI, any change need to be saved first. After all
changes made, click reboot to make the changes effective. The following sections describe details of the
web UI.
Web User Interface
Network
DHCP client
By default, iGS02E is a DHCP client.
INGICS TECHNOLOGY CO., LTD. • [email protected] • WWW.INGICS.COM
4
