Ingeteam INGECON SUN 1Play 2.5TL, Installation And Operation Manual

Page: 67 / 260

7. Use of cable grommets
There is a series of cable grommets to insert cables into the unit. Follow the instructions below for their correct
use:
1
2 3
1. Make a hole in the cable grommet membrane using a screwdriver.
2. Insert the cables through the hole made. Make sure the cable passes through the rear structure of the
cable grommet correctly.
3. Pull the cable gently outwards until resistance is felt so that the cable is correct secured and the
membrane creates a seal.
Section “2.9. Description of cable inlets” indicates the range of cable diameters valid for each cable
grommet.
67
Use of cable grommets Ingeteam
ABE2011IQM01_B - Installation and Operation Manual
DE
EN
ES
FR
IT
PT