Ingeteam INGECON SUN 1Play 2.5TL, Installation And Operation Manual

Page: 66 / 260

6.3. Opening and closing the housing
To install the equipment it is not necessary to open the housing unless you wish to modify the ground
connection or install an accessory.
To access the inside of the unit open the cover of the housing by removing the four front screws.
After making the different connections explained in the sections below, close the unit before starting it. To close
the housing, tighten the aforementioned screws, applying a torque of 6 Nm.
Check that the unit is correctly closed before starting up the unit.
66
Installing the unit Ingeteam
ABE2011IQM01_B - Installation and Operation Manual