16
BAS-SVU044A-EN
Enable After Hours — Timed
Occupancy Override
If schedule is disabled
•
Then this feature does not appear. In this situation, simply press the
Unoccupied House to change to occupied set point. The thermostat will
continue to use occupied setpoint until the house symbol is pressed
again.
When schedule is enabled.
•
During unoccupied periods, the occupied set point are used and set point
adjustment is not allowed. To get heating or cooling after hours, Time
Occupancy Override is used.
Figure 3.
Screen showing Unoccupied
Symbol used for
Unoccupied
When in Unoccupied
mode, use this Timed
Override button to
put the thermostat into
occupied mode for
2 hours
Unoccupided setpoints. These
will only be active and allow changes
when a Timed Override is started.
To start a timed occupancy override occupancy, H
HO
OM
ME
E >
> lle
efftt ssiid
de
e o
off ssccrre
ee
en
n
>
> O
ON
N//O
OF
FF
F b
bu
utttto
on
n, which has a power button symbol.
Pushing the S
ST
TA
AR
RT
T button begins the timed override. The thermostat will
change to occupied mode and the temperature setpoints will change to the
occupied settings. See
A timer appears and will begin counting down. See
After the timer counts down, the thermostat reverts to unoccupied and the
temperature setpoints also revert to unoccupied.
The timed occupancy override can be canceled by pressing the X
X button on
the left side of the home screen.
The 2-hour default can be changed by going to H
HO
OM
ME
E >
> M
ME
EN
NU
U >
>
O
OC
CC
CU
UP
PA
AN
NC
CY
Y O
OV
VE
ER
RR
RIID
DE
E >
> D
DU
UR
RA
AT
TIIO
ON
N L
LIIM
MIIT
T. Select from 2 to 10 hours.
Tap A
AP
PP
PL
LY
Y.