background image

 

Controls and Indicators

 

Page 14

IR Industrial Electric Vehicle Owner’s Manual

 

TOW/RUN SWITCH

 

∆ 

 

WARNING

 

• Place Tow/Run switch in the TOW position before disconnecting or connecting the batteries.

Failure to heed this warning could result in a battery explosion or severe personal injury.

• When the Tow/Run switch is in the TOW position, all motor braking functions, including zero-

speed detect, are disabled.

 

The vehicle is equipped with a Tow/Run switch, located under the seat just above the Forward/Reverse switch

 

(Figure 8)

 

The switch must be in the RUN position in order to operate the vehicle. When the switch is in the

TOW position, power to the vehicle electrical components is turned off and the vehicle will not operate. 

 

See

following NOTE.

 

NOTE: 

 

After placing the Tow/Run switch in the TOW position, allow 10 seconds to elapse before switching
back to the RUN position.

After placing the Tow/Run switch in the RUN position, allow 10 seconds to elapse before operating
the vehicle.

 

The Tow/Run switch should be placed in the TOW position under the following conditions:

 

• Before Towing  the Vehicle:

 

 Place the Tow/Run switch in the TOW position to disable all motor braking

functions, thus preventing possible damage that could occur to the vehicle or electrical components if
the vehicle is towed while the Zero-Speed Detect motor braking function is operating.

 

• Before Disconnecting or Connecting Battery Cables:

 

 Place the Tow/Run switch in the TOW position

to turn off power to the vehicle electrical system, thus preventing severe arcing and possible battery
explosion as the battery wires are disconnected.

 

• For Long Term Storage:

 

 Place the Tow/Run switch in the TOW position to turn off power to the vehicle

electrical system, thus preventing vehicle electrical components from discharging the batteries.

 

Figure 8   Tow/Run Switch

F

TOW

RUN

WARNING

Summary of Contents for Run-A-Bout









































Reviews: