Ingersoll-Rand R02 B Series, Product Information, Page: 3 / 56

04578399_ed5 EN-1
EN
Product Safety Information
Intended Use:
These Air Orbital Sanders are designed for smoothing and sanding paint, fi berglass, wood
and body fi ller.
For additional information refer to Safety Information Manual Form 04580387.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifi cations
Model
Free
Speed
Pad Diameter
Sound Level dB (A)
(ISO15744)
Vibration m/s2
(ISO28927)
rpm inch mm † Pressure (L
p
) ‡ Power (L
w
) Level *K
R025B-CLV-1 12000 5 127 81.6 92.6 3.5 1.5
R025B-CSV-1 12000 5 127 81.6 92.6 3.5 1.5
R025B-CSV-2 12000 5 127 81.6 92.6 3.7 1.5
R025B-PSV-1 12000 5 127 81.6 92.6 3.5 1.5
R025B-PSV-2 12000 5 127 81.6 92.6 3.7 1.5
R025B-VLV-1 12000 5 127 81.6 92.6 3.5 1.5
R026B-CLV-1 12000 6 152 81.6 92.6 7.0 2.2
R026B-CSV-1 12000 6 152 81.6 92.6 7.0 2.2
R026B-CSV-2 12000 6 152 81.6 92.6 7.0 2.2
R026B-PSV-1 12000 6 152 81.6 92.6 7.0 2.2
R026B-VLV-1 12000 6 152 81.6 92.6 7.0 2.2
R026B-VLV-2 12000 6 152 81.6 92.6 7.0 2.2
† K
pA
= 3dB measurement uncertanity
‡ K
wA
= 3dB measurement uncertanity
* K = Vibration measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air fi lter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off , to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16577215 and table on page 2. Maintenance frequency is shown in a
circular arrow and defi ned as h=hours, d=days, and m=months of actual use. Items identifi ed as:
1. Regulator 5. Coupling
2. Emergency shut-off valve 6. Safety Air Fuse
3. Hose diameter 7. Grease - Remove sanding pad and inject
4. Thread size