Ingersoll-Rand R Series, Installation, Operation & Maintenance Manual, Page: 27 / 77

27
1. DEW POINT MENU ---------------------------------------------------------------------------------------------------------------------------------------
DEWPOINT
MENU
Press SET to select
DEWPOINT - The dryer will attempt to deliver a dew point relative to the
DEWPOINT SET POINT value. The range can for this setting can be selected between
34ºF to 50°F.
When the dew point indicated the set point value or less, the panel LCD display will give a mes-
sage: POWERSAVE ACTIVE
D1 DEWPOINT
Value: 36°F
Set point. 34ºF
2. SETUP MENU ----------------------------------------------------------------------------------------------------------------------------------
Screen series ‘E’, ‘F’, ‘G’, ‘R’ and ‘I’ are within the set-up selections.
SYSTEM - E & H SERIES SCREENS
SETUP
MENU
Press SET to select
E1 COMPANY
INFORMATION
Press SET to select
E1 Ingersoll-Rand
(1-800-526-3615)
Copyright( c )2001
E2 PRODUCT
INFORMATION
Press SET to select
E2 VCD - Variable Speed
AIR DRYER
Serial # 00000
Firmware Rev. 1.00
______________________________________________________________________________________________________
FACTORY DEFAULTS - To set all parameters to there factory setting, depress the SET pushbutton
when in the ‘E7’ screen. IMPORTANT: Make sure that all calibrations are set to currently installed
ranges of the sensor transducers. For example, if in servicing the dryer and there was a replace-
ment of a pressure transducer with a range of 0 to 250 (instead of the factory installed transducer
with a range of 0 to 200), then the Factory Defaults will need to be re-adjusted for that particular
channel (see CALIBRATION MENU).