3
PLACING TOOL IN SERVICE
LUBRICATION
Ingersoll–Rand No. 10
Gearing:
Ingersoll–Rand No. 67
Clutch:
Ingersoll–Rand No. 28
Always use an air line lubricator with this tool.
We recommend the following Filter–Lubricator–Regulator
Unit:
For USA – No. C08–02–FKG0–28
Whenever the tool is disassembled for maintenance or
repair, lubricate the gear train with Ingersoll–Rand No. 67
Grease.
Whenever the tool is disassembled for maintenance or
repair, lubricate the clutch assembly with Ingersoll–Rand
No. 28 Grease.
After every 40,000 cycles or one month, or as experience
indicates, inject 2 to 4 cc of Ingersoll–Rand No. 67 Grease
into the Grease Fitting on the Angle Attachment.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
FILTER
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
COMPRESSOR
(Dwg. TPD905–1)
