INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX (800) 892-6276
© 2019
CCN 15214158
arozone.com
OPERATOR’S MANUAL
PE10P-X-X-A0S
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE
RELEASED: 9-14-04
REVISED: 3-8-19
(REV: N)
1” DIAPHRAGM PUMP
1:1 RATIO (METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
PE10P-AXS-XXX-A0S
PE10P-BXS-XXX-A0S
PE10P-YXS-XXX-A0S
PE10P-FXS-XXX-A0S
SERVICE KITS
Refer to Model Description Chart to match the pump mate-
rial options.
637396-XXX
for Fluid Section Repair
with
seats (see page 4).
637396-XX
for Fluid Section Repair
without
seats
(see page 4).
NOTE:
This kit also contains several air motor seals which will
need to be replaced.
637412
for Air Section Repair (see page 6).
PUMP DATA
Models
. . . . . . . . . . . .see Model Description Chart for “-XXX”
Pump Type
. . . . . . . .Non-Metallic Air Operated
Double Diaphragm
Material
. . . . . . . . . . .see Model Description Chart
Weight
. . . PE10P-AKS-XXX-A0S . . . . . . 25.40 lbs (11.52 kgs)
PE10P-APS-XXX-A0S . . . . . . 18 .92 lbs (8 .58 kgs)
PE10P-BKS-XXX-A0S . . . . . . 25.40 lbs (11.52 kgs)
PE10P-BPS-XXX-A0S . . . . . . 18 .92 lbs (8 .58 kgs)
PE10P-FKS-XXX-A0S . . . . . . . 26 .72 lbs (12 .12 kgs)
PE10P-FPS-XXX-A0S . . . . . . . 19 .44 lbs (8 .82 kgs)
PE10P-YKS-XXX-A0S . . . . . . . 26 .29 lbs (11 .93 kgs)
PE10P-YPS-XXX-A0S . . . . . . . 19 .16 lbs (8 .69 kgs)
Maximum Air Inlet Pressure
. . . . . . . . 120 psig (8.3 bar)
Maximum Material Inlet Pressure.
. . 10 psig (0.69 bar)
Maximum Outlet Pressure
. . . . . . . . . . 120 psig (8.3 bar)
Maximum Flow Rate
(Flooded inlet) . . . . .
53.0 gpm (200.6 lpm)
Displacement / Cycle @ 100 psig
. . . . 0.226 gal. (0.86 lit.)
Maximum Particle Size
. . . . . . . . . . . . . 1/8” dia. (3.2 mm)
Maximum Temperature Limits
(diaphragm / ball / seat materials)
E.P.R / EPDM. . . . . . . . . . . . . . . -60
to 280
F (-51
to 138
C)
Hytrel
. . . . . . . . . . . . . . . . . . -20
to 180
F (-29
to 82
C)
Nitrile . . . . . . . . . . . . . . . . . . . 10
to 180
F (-12
to 82
C)
Polypropylene . . . . . . . . . . . . 32
to 175
F (0
to 79
C)
PVDF (Kynar
) . . . . . . . . . . . 10
to 200
F (-12
to 93
C)
Santoprene
. . . . . . . . . . . . . -40
to 225
F (-40
to 107
C)
PTFE. . . . . . . . . . . . . . . . . . . . . . 40
to 225
F (4
to 107
C)
Viton
. . . . . . . . . . . . . . . . . . -40
to 350
F (-40
to 177
C)
Dimensional Data
. . . . . . . . . . . . . . . . . . . see page 8
Mounting Dimension
. 5.032” x 10.050” (127.8 mm x 255.3 mm)
Noise Level
@ 70 psig, 60 cpm . . . . . . . 79.7 dB(A)
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (LA
eq
) to meet the intent of ANSI
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended. Consult a representative or
the factory if you have questions concerning availability.
Figure 1
MODEL DESCRIPTION CHART
PE10P - X X S - X X X - A0S
Fluid Connection / Location
A - 1- 11-1/2 NPTF - 1
B - Rp 1- 11 BS
F - 1” ANSI / DN Flange / End
Y - 1” ANSI / DN Flange / Center
Centre Section Material
P - Polypropylene
Ball Material
A - Santoprene
S - 316 Santoprene
C - Hytrel
T - PTFE
G- Nitrile
V - Viton
M- Medical Grade Santoprene
Fluid Section Service Kit Selection
EXAMPLE: Model #PE10P-FPS-PAA-A0S
Fluid Section Service Kit # 637396-AA
PE10P - XXS - X X X - A0S
Ball
Diaphragm
637396 - X X
Fluid Caps and Manifold Material
K - PVDF (Kynar)
P - Polypropylene
Diaphragm Material
A - Santoprene L - Long Life PTFE V - Viton
C - Hytrel M - Medical Grade Santoprene
G- Nitrile T - PTFE / Santoprene
Seat Material
H - Hard 440 Stainless Steel
K - PVDF (Kynar)
P - Polypropylene
S - 316 Stainless Steel
Hardware Material
S - Stainless Steel
