background image

2

PORTABLE POWER PRODUCT WARRANTY

Ingersoll-Rand, through its distributor, war rants that each 
item of equipment man u fac tured by it and de liv ered here un-
der to the ini tial user will be free of de fects in material and 
workmanship for a period of three (3) months from ini tial 
op er a tion or six (6) months from the date of ship ment to the 
initial user, which ev er oc curs fi rst.

With respect to the following types of equip ment, the war-
 ran ty period enumerated below will ap ply in lieu of the fore-
go ing warranty pe ri od.

A. Aftercoolers 

– 

The earlier of nine (9) months from date 

of shipment to or six (6) months from ini tial op er a tion by 
initial user.

B.  Portable Compressors, Portable Gen er a tor Sets 

– 9 Kva through to 550 Kva, Por ta ble Light Tow-
 ers and Air Dryers – 

The ear li er of twelve (12) months 

from ship ment to or the ac cu mu la tion of 2,000 hours of 
op er a tion by the ini tial user.

 

2.5 Kva Through to 8 Kva – 

The earlier of twelve (12) 

months from shipment to or the ac cu mu la tion of 2,000 
hours of operation by the initial user.
Ingersoll-Rand will provide a new part or re paired part, 
at it’s sole discretion, in place of any part which is found 
to be defective in ma te ri al or work man ship during the 
period de scribed above.  La bour cost to re place the part 
is the re spon si bil i ty of the ini tial user.

C.  Portable Compressor Air Ends – 

The ear li er of twen ty-

four (24) months from ship ment to or the ac cu mu la tion of 
4,000 hours of op er a tion by the ini tial user.  For Air Ends, 
the war ran ty against de fects will in clude re place ment of 
the complete Air End, pro vid ed the orig i nal Air End is 
returned as sem bled and all orig i nal seals are in tact.

D.  Portable Compressor Airend Lim it ed Ex tend ed 

Warranty – 

The earlier of sixty (60) months from ship-

 ment to or the ac cu mu la tion of 10,000 hours of op er a tion 
by the ini tial user.  This ex tend ed war ran ty is lim it ed to 
defects in de sign or de fec tive ma te ri al or work man ship 
in rotors, housings, bear ings and gears and pro vid ed all 
the following con di tions are met:

 

1. The original air end is returned as sem bled and all 

orig i nal seals are intact.

 

2.  Continued use of genuine Ingersoll-Rand parts, fl u ids, 

oil and fi lters.

 

3.  intervals by authorised and properly trained ser vice 

en gi neers.

E.  Generator Alternator – 9 Kva through to 550 Kva, 

the earlier of twenty-four (24) months from ship ment to 
or the ac cu mu la tion of 4,000 hours of op er a tion by the 
initial user.

 

2.5 Kva Through to 8Kva – 

 The earlier of twelve (12) 

months from shipment to or the ac cu mu la tion of 2,000 
hours of operation by the ini tial user.

F. Portable 

Light 

Tower 

Alternator 

– 

The ear li er of 

twelve (12) months from ship ment to or the ac cu mu la tion 
of 2,000 hours of operation by the initial user.  Light 
Source mod el only, the ear li er of twen ty-four (24) months 
from ship ment to or the ac cu mu la tion of 4,000 hours of 
op er a tion by the ini tial user.

G.  Ingersoll-Rand Engines – 

The earlier of twen ty-four 

(24) months from shipment to or the ac cu mu la tion of 
4,000 hours of op er a tion by the ini tial user.

H.  Ingersoll-Rand Platinum Drive Train Lim it ed Ex-

tend ed Warranty – 

 Plat i num drive train refers ot the 

Ingersoll-Rand En gine and Airend com bi na tion.  The ear-

li er of sixty (60) months from ship ment to, or the ac cu mu-
la tion of 10,000 hours of op er a tion by the ini tial user.  The 
starter, alternator, fuel in jec tion sys tem and all elec tri cal 
com po nents are ex clud ed from this ex tend ed war ran ty.  
The airend seal and drive cou pling are in clud ed in the 
warranty but airend drive belts are ex clud ed.  This lim-
ited extended warranty is au to mat i cal ly avail able when 
meet ing the fol low ing con di tions:

 

1. The original airend is returned as sem bled and un-

opened.

 

2.  Continued use of genuine Ingersoll-Rand parts, fl u ids, 

oil and fi lters.

 

3.  Maintenance is performed at prescribed in ter vals by 

au tho rised and properly trained ser vice en gi neers.

I. Construction 

Tools, 

(Portable 

Pow 

er range only) 

– 

Twelve months from ship ment to ini tial user.  In ger-

soll-Rand will provide a new part or repaired part, at it’s 
sole dis cre tion, in place of any part which is found to be 
de fec tive in material or workmanship dur ing the period 
de scribed above.  Labour cost to re place the part is the 
re spon si bil i ty of the ini tial user.

J.  Spare Parts – 

Six (6) months from date of ship ment to 

the initial user. Ingersoll-Rand will provide a new part or 
re paired part, at its sole discretion, in place of any part 
that is found to be defective in material and work man ship 
dur ing the period described above.  Such parts will be 
re paired or replaced without charge to the ini tial user 
during normal working hours at the place of business of 
an Ingersoll-Rand dis trib u tor au tho rised to sell the type 
of equipment in volved or oth er es tab lish ment au tho rised 
by Ingersoll-Rand. User must present proof of purchase 
at the time of ex er cis ing war ran ty.  The above war ran ties 
do not ap ply to failures oc cur ring as a result of abuse; 
mis use, negligent repairs, cor ro sion, erosion and nor mal 
wear and tear, alterations or mod i fi  ca tions made  to the 
product without express writ ten con sent of In ger soll-
Rand; or failure to follow the rec om mend ed op er at ing 
practices and maintenance procedures as pro vid ed in 
the prod uct’s operating and maintenance publications.

Accessories or equipment furnished by Ingersoll-Rand, 
but manufactured by others, including, but not limited 
to, en gines, tires, batteries, engine electrical equip ment, 
hy drau lic trans mis sions, carriers, shall carry only the 
man u fac tur ers war ran ty, which In ger soll-Rand can law-
 ful ly assign to the initial user.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTH ER 
WARRANTIES EXPRESSED OR IM PLIED, (EX CEPT THAT 
OF TITLE), AND THERE ARE NO WARRANTIES OF MER-
CHANTABIL I TY OR OF FITNESS FOR A PARTICULAR 
PURPOSE.

Summary of Contents for IR15BS

























































Reviews: