Ingersoll-Rand HP825WCU, Operating, Maintenance And Parts Manual

Page: 5 / 434

Book 35393560 (12/02)
5
( )
Nothing contained in this document is intended to extend any promise, warranty or representation, expressed or
implied, regarding the Ingersoll--Rand products described herein. Any such warranties or other terms and
conditions of sale of products shall be in accordance with the standard terms and conditions of sale for such
products, which are available upon request.
This manual contains instructions and technical data to cover all routine operation and scheduled maintenance
tasks by operation and maintenance staff. Major overhauls are outside the scope of this manual and should be
referred to an authorized Ingersoll--Rand service department.
All components, accessories, pipes and connectors added to the compressed air system should be:
S
of good quality, procured from a reputable manufacturer and, wherever possible, be of a type approved by
Ingersoll--Rand.
S
clearly rated for a pressure at least equal to the machine maximum allowable working pressure.
S
compatible with the compressor lubricant/coolant.
S
accompanied with instructions for safe installation, operation and maintenance.
Details of approved equipment are available from Ingersoll--Rand Service departments.
The use of repair parts other than those included within the Ingersoll--Rand approved parts list may create
hazardous conditions over which Ingersoll--Rand has no control. Therefore, Ingersoll--Rand cannot be held
responsible for equipment in which non--approved repair parts are installed.
Ingersoll--Rand reserves the right to make changes and improvements to products without notice and without
incurring any obligation to make such changes or add such improvements to products sold previously.
The intended uses of this machine are outlined below and examples of unapproved usage are also given.
However, Ingersoll--Rand cannot anticipate every application or work situation that may arise. If in doubt,
consult supervision.
This machine has been designed and supplied for above ground operation to be used for compression of normal
ambient air containing no additional gases, vapors or particles within the ambient temperature range specified in
the general data section of this manual.
This machine should not be used:
A. For direct or indirect human consumption of the compressed air.
B. Outside the ambient temperature range specified in the general data section of this manual.
C. When an actual or foreseeable risk of hazardous levels of flammable gases or vapors exists.
D. With other than Ingersoll--Rand approved components.
E. With guards, or controls or switches missing or disabled.
F. For storage or transportation of materials inside or on the enclosure.
This company accepts no responsibility for errors in translation of this manual from the original English version.
You as the customer are expected to provide certain service and maintenance items. Your Ingersoll--Rand dealer
will provide all other more detailed service and maintenance items on a special preventive maintenance schedule
for each machine. It is very important that the minimum service and maintenance requirements explained in this
manual be performed at the required intervals. Exceeding these intervals may reduce the reliability of the
machine.
The purpose of this manual is to train the operator with functions, operation, and basic service and maintenance
requirements of the compressor. During the preparation of this manual, every effort was made to ensure the
adequacy and accuracy of the contents.