Ingersoll-Rand HP600CMH, Operating, Maintenance & Parts Manual

Page: 40 / 44

Book 43212455 (11/03) 40
MARKINGS AND DECALS
NOTICE
Do not paint over safety warnings or
instructional decals. If safety warning decals
become illegible, immediately order
replacements from the factory.
Part numbers for original individual decals and
their mounting locations are shown within Parts
List. These are available as long as a particular
model is in production.
Afterwards, service sets of exterior decals and
current production safety warning decals are
available. Contact the Product Support Group at
Mocksville for your particular needs and
availability.
HOW TO USE PARTS LIST
a.
Turn to Parts List Section.
b. Locate the area or system of the
compressor in which the desired part is
used and find illustration page number.
c.
Locate the desired part on the illustration
by visual identification and make note of
part number and description.
HOW TO ORDER
The satisfactory ordering of parts by a purchaser
is greatly dependent upon the proper use of all
available information. By supplying your nearest
sales office, autonomous company or authorized
distributor, with complete information, you will
enable them to fill your order correctly and to
avoid any unnecessary delays.
In order that all avoidable errors may be
eliminated, the following instructions are offered
as a guide to the purchaser when ordering
replacement parts:
a.
Always specify the model number of the
unit as shown on the general data decal
attached to the unit.
b.
Always specify the serial number of the
unit. THIS IS IMPORTANT. The serial
number of the unit will be found stamped
on a plate attached to the unit.
c.
Always specify the number of the parts list
publication.
d. Always specify the quantity of parts
required.
e.
Always specify the part number, as well as
the description of the part, or parts, exactly
as it is given on the parts list illustration.
In the event parts are being returned to your
nearest sales office, autonomous company or
authorized distributor, for inspection or repair, it
is important to include the serial number of the
unit from which the parts were removed.
TERMS/CONDITIONS ON PARTS ORDERS
Acceptance:
Acceptance of an offer is
expressly limited to the exact terms contained
herein. If purchaser’s order form is used for
acceptance of an offer, it is expressly understood
and agreed that the terms and conditions of such
order form shall not apply unless expressly
agreed to by Ingersoll-Rand Company
(“Company”) in writing. No additional or contrary
terms will be binding upon the Company unless
expressly agreed to in writing.
Taxes: Any tax or other governmental charge
now or hereafter levied upon the production,
sale, use or shipment of material and equipment
ordered or sold is not included in the Company’s
price and will be charged to and paid for by the
Purchaser.
Delivery: Shipping dates are approximate. The
Company will use best efforts to ship by the
dates specified; however, the Company shall not
be liable for any delay or failure in the estimated
delivery or shipment of material and equipment
or for any damages suffered by reason thereof.
Shipping dates shall be extended for delays due
to acts of God, acts of Purchaser, acts of
Government, fires, floods, strikes, riot, war,
embargo, transportation shortages, delay or
default on the part of the Company’s vendors, or
any other cause beyond the Company’s
reasonable control.