PX30R-XXX-XXX-CXXX (en)
Page 9 of 12
PX30X-XAX-XXX-CXXX
23-5/8” (600.1 mm)
2-3/8” (60.3 mm)
11” (279.4 mm)
15-1/2” (393.7 mm)
PX30X-XCX-XXX-CXXX
23-5/8” (600.1 mm)
2-7/16” (61.9 mm)
11-11/16” (296.9 mm)
15-1/2” (393.7 mm)
PX30X-XHX-XXX-CXXX
23-1/8” (587.4 mm)
2-3/4” (69.9 mm)
11-11/16” (296.9 mm)
16” (406.4 mm)
PX30X-XSX-XXX-CXXX
23-1/8” (587.4 mm)
2-3/4” (69.9 mm)
11-11/16” (296.9 mm)
16” (406.4 mm)
PX30X-DXX-XXX-CXXX
23-1/8” (587.4 mm)
2-3/4” (69.9 mm)
11-11/16” (296.9 mm)
16” (406.4 mm)
PX30X-FXX-XXX-CXXX
23-1/8” (587.4 mm)
2-3/4” (69.9 mm)
11-11/16” (296.9 mm)
16” (406.4 mm)
“A”
“D”
“J”
“N”
“L”
“G”
2-3/4” (69.9 mm)
32” (812.8 mm)
2-3/4” (69.9 mm)
32” (812.8 mm)
2-3/4” (69.9 mm)
32” (812.8 mm)
2-3/4” (69.9 mm)
32” (812.8 mm)
3-3/4” (95.25 mm)
33-15/16”(862.0 mm)
3-3/4” (95.25 mm)
33-15/16”(862.0 mm)
Inlet
Outlet
A
E
F
G
L
L
G
P
M
J
H
K
C
Air Inlet Ports
3/4 - 14 NPTF -1
PX30X-FXX-XXX-CXXX
Flange Dimensions per
ISO 7005-1:1992 PN10 DN80
PX30X-DXX-XXX-CXXX
Flange Dimensions per ASME
B16.5-2003 Class 150 3 Inch
D
D
N
B
B
Dotted lines show
optional 67263 muffler
assembly.
Exhaust Port1
1/2 - 11-1/2 NPT
3 - 8 NPTF- 1 (PX30X-AXX-XXX-CXXX)
Rp 3 (3 - 11 BSP parallel) (PX30X-BXX-XXX-CXXX)
D
B
TROUBLE SHOOTING
Product discharged from exhaust outlet.
y
Check for diaphragm rupture.
y
Check tightness of (14) cap screw.
Air bubbles in product discharge.
y
Check connections of suction plumbing.
y
Check “O” rings between intake manifold and fluid caps.
y
Check tightness of (14) cap screw.
Motor blows air or stalls.
y
Check (176) check valve for damage or wear.
y
Check for restrictions in valve / exhaust.
Low output volume, erratic flow or no flow.
y
Check air supply.
y
Check for plugged outlet hose.
y
Check for kinked (restrictive) outlet material hose.
y
Check for kinked (restrictive) or collapsed inlet material hose.
y
Check for pump cavitation - suction pipe should be sized at
least as large as the inlet thread diameter of the pump for
proper flow if high viscosity fluids are being pumped. Suction
hose must be a non-collapsing type, capable of pulling a high
volume.
y
Check all joints on the inlet manifolds and suction connections.
These must be air tight.
y
Inspect the pump for solid objects lodged in the diaphragm
chamber or the seat area.
DIMENSIONAL DATA
Dimensions shown are for reference only, they are displayed in inches and millimeters (mm).
Figure 4
DIMENSIONS
A - see below
B - 30” (762.0 mm)
C - 12-1/16” (306.4 mm)
D - see below
E - 17-11/16” (449.2 mm)
F - 15” (381.0 mm)
G - 32” (812.8 mm)
H - 10-5/32” (258.0 mm)
J - see below
K - 9/16” (14.3 mm)
L - see below
M - 23-3/32” (586.3 mm)
N - see belo
P - 1-3/16” (30.2mm)
