3
PLACING TOOL IN SERVICE
LUBRICATION
Ingersoll–Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
For USA – No. C31–06–G00
Before starting the tool, unless the air line lubricator is used,
detach the air hose and inject about 1.5 cc of oil into the air
inlet. For models with a built–in oiler, remove the Oil
Chamber Plug and fill the chamber.
After each eight hours of operation, or as experience
indicates, replenish the oil supply in the Handle.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
FILTER
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
COMPRESSOR
(Dwg. TPD905–1)
HOW TO ORDER A SANDER
VERTICAL DISK WHEEL SANDER
Model
Free Speed, rpm
Spindle and Back Up Pad
99S45W109
4,500
5/8–11, 9”
99S60W107
6,000
5/8–11, 7”
