EN-2
80167513_ed1
EN
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily.
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device
across any hose coupling without internal shut-off, to prevent hose whipping if a hose fails
or coupling disconnects. See drawing 16585796 and table on page 2. Maintenance
frequency is shown in circular arrow and defined as h=hours, d=days, and m=months.
Items identified as:
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest
Ingersoll Rand
Office or Distributor.
8TN32-EU
3/8
85.4
98.4
1.8
8TP53-EU
1/2
79.8
- - -
1.8
8TQ53-EU
1/2
86.9
99.9
1.1
1. Air filter
7.
Coupling
2. Regulator
8.
Safety Air Fuse
3. Lubricator 9.
Oil
4. Emergency shut-off valve
10. Grease - through fitting
5. Hose diameter
11. Grease - through fitting
6. Thread size
Model(s)
Drive Size
Sound Level dB(A)
(ANSI S5.1-1971)
Vibration Level
(ISO8662)
in.
Pressure
Power
(ISO3744)
m/s
2
Summary of Contents for 8-EU Series
Page 47: ...Notes...
