Ingersoll-Rand 7P24L-EU, Instructions Manual

Page: 3 / 51

3
PLACING TOOL IN SERVICE
LUBRICATION
Ingersoll–Rand No. 10 Ingersoll–Rand No. 28
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
International – No. C18–C3–FKG0
After each eight hours of operation, replenish the oil
supply. Adequate lubrication is imperative for satisfactory
Gear life.
After each 50 000 cycles or each month, whichever
occurs first, inject approximately 6 cc of Ingersoll–Rand
No. 28 Grease into the Grease Fitting.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
FILTER
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
COMPRESSOR
(Dwg. TPD905–1)
SPECIFICATIONS
Sander Throttle Free Speed Spindle and
Back Up Pad
G
Sound Level
dB (A)
♦
Vibrations
Level
rpm Pressure Power m/s
2
7S30L–EU + Lever 3 000 5/8–11, 7” 89.5 102.5 1.7
7S48L–EU Lever 4 800 5/8–11, 7” 81.4 – – – 0.9
7S60L–EU Lever 6 000 5/8–11, 7” 82.0 – – – 0.9
Polisher Throttle Free Speed Spindle and
Back Up Pad
G
Sound Level
dB (A)
♦
Vibrations
Level
rpm Pressure Power m/s
2
7P24L–EU Lever 2 400 5/8–11, 7” 82.7 – – – 1.6
H
Tested in accordance with ANSI S5.1–1971 at free speed
♦
Tested in accordance with ISO8662–1 sanding on steel workpiece
+ Tested in accordance with PNEUROP PN8NTC1.2