47132691_ed1
EN-1
EN
Product Safety Information
Intended Use:
These Drills are designed for driving fasteners and drilling.
For Additional information refer to Product Safety Information Manual
Form 04580353.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specifications
Model Style
Free Speed Chuck Capacity
Sound Level dB (A)
(ISO15744)
Vibration
(ISO28927)
m/s²
rpm
in (mm)
† Pressure (L
p
) ‡ Power (L
w
)
Level
*K
7804XP Pistol 1600 @ 90 psi
1/4 (6.35)
83.6
94.6
3.0
0.8
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16573180 and table on page 2. Maintenance frequency is shown in circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
7.
Coupling
2. Regulator
8.
Safety Air Fuse
3. Lubricator
9.
Oil
4. Emergency shut-off valve
10. Grease - during assembly
5. Hose diameter
11. Grease - through fitting
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest
Ingersoll Rand
Office or Distributor.
Summary of Contents for 7804XP
Page 31: ...Notes...
Page 32: ...www ingersollrandproducts com 2010 Ingersoll Rand Company...
