Ingersoll-Rand 6 Seres, Product Information

Page: 3 / 60

16572190_ed3 EN-1
EN
Product Safety Information
Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
For additional information refer to Product Safety Information Manual Form 04580353.
Manuals can be downloaded from ingersollrandproducts.com
Product Specifications
Models Style
Free
Speed
Chuck
Capacity
Sound Level dB(A)
(ISO15744)
Vibration (m/s²)
(ISO28927)
rpm inch (mm)
† Pressure (L
p
) ‡ Power (L
w
) Level *K
6LH1 Lever 6000 1/4 (6) 76.3 -- < 2.5 --
6LH1-EU Lever 6000 1/4 (6) 76.3 -- < 2.5 --
6LJ1 Lever 5100 1/4 (6) 80.0 91.0 < 2.5 --
6LJ1-EU Lever 5100 1/4 (6) 80.0 91.0 < 2.5 --
6LJJ1 Lever 3950 1/4 (6) 77.7 -- < 2.5 --
6LJJ1-EU Lever 3950 1/4 (6) 77.7 -- < 2.5 --
6LK1 Lever 3100 1/4 (6) 74.3 -- < 2.5 --
6LK1-EU Lever 3100 1/4 (6) 74.3 -- < 2.5 --
6LL1 Lever 2150 1/4 (6) 74.0 -- 4.8 1.0
6LL1-EU Lever 2150 1/4 (6) 74.0 -- 4.8 1.0
6LR3 Lever 500 3/8 (10) 71.8 -- 4.8 1.0
6LR3-EU Lever 500 3/8 (10) 71.8 -- 4.8 1.0
† K
pA
= 3dB measurement uncertainty * K = Vibration measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
WARNING
Sound and vibration values were measured in compliance with internationally recognized test
standards. The exposure to the user in a specific tool application may vary from these results.
Therefore, on site measurements should be used to determine the hazard level in that specific
application.
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain condensate
from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety
Air Fuse upstream of hose and use an anti-whip device across any hose coupling without internal shut-
off, to prevent hose whipping if a hose fails or coupling disconnects. See drawing 16575599 and table
on page 2. Maintenance frequency is shown in a circular arrow and defined as h=hours, d=days, and
m=months of actual use. Items identified as:
1. Air filter 7. Coupling
2. Regulator 8. Safety Air Fuse
3. Lubricator 9. Oil
4. Emergency shut-off valve 10. Grease - during assembly
5. Hose diameter 11. Grease - through fitting
6. Thread size