Ingersoll-Rand 290 Series, Product Information

Page: 3 / 32

16581969_ed3 EN-1
EN
Product Saf�ty Information
Int�nd�d Us�:
T��s� Air Impact �r�nc��s ar� d�sign�d to r�mov� and install t�r�ad�d fast�n�rs.
For additional information r�f�r to Air Impact �r�nc� Product Saf�ty Information Manual
Form 04580916.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Sp�cifications
Mod�ls Styl�
Driv�
Impacts
p�r
min.
R�comm�nd�d
Torqu� Rang�
Sound L�v�l dB(A)
(ANSI S5.1-1971)
Vibration (m/s²)
(ISO28927)
Typ� Siz� ft-lb (Nm) Pr�ssur�
Pow�r
(ISO3744) L�v�l
*K
290
290-EU Pistol Square 1”
800
150 - 1000
(203 - 1356)
104.6 117.6 22.7 2.6
290-6-EU Pistol
Square
6” ex-
tended
1” 800
150 - 1000
(203 - 1356)
104.6 117.6 15.8 5.2
* K = Vibration measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 47132600 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter 7. Coupling
2. Regulator 8. Safety Air Fuse
3. Lubricator 9. Oil
4. Emergency shut-off valve 10. Grease - during assembly
5. Hose diameter 11. Grease - through fitting
6. Thread size
Parts and Maint�nanc�
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest
Ing�rsoll Rand Office or Distributor.