Ingersoll-Rand 2705P1, Parts And Maintenance

Page: 7 / 8

PXXX-3 Ed 1 7
Motor Housing Assembly 231C-A40
1 Motor Housing 231C-40Y
2 Grease Fitting 130SR-188
2A Housing Label WARNING-2-99
3 Reverse Valve Bushing 231-A330
• 4 Reverse Valve Bushing Seal (2) PS3-67
5 Throttle Valve Assembly 404-50A
• 6 Throttle Valve Face 405-159
• 7 Throttle Valve Spring R1A-51
8 Throttle Valve Stem 402-302
9 Air Strainer Assembly 402-565
10 Trigger 705-93
11 Trigger Pin 533-656
11A Plug 502-95
12 Reverse Valve 231-329A
• 13 Reverse Valve Detent Ball AV1-255
• 14 Reverse Valve Detent Spring 231-664
15 Reverse Valve Knob 231-666
16 Reverse Valve Knob Screw 231-665
22 Rotor 231-53
• 23 Rear Rotor Bearing 402-22
• 24 Front Rotor Bearing 4U-97
• 25 Rear Rotor Bearing Retainer 402-118
26 Cylinder 231XP-3
27 Cylinder Dowel 230-98
• 29 Vane Packet (set of 6 Vanes) 2131-42A-6
30 Front End Plate 231-11
31 Rear End Plate 231-12
• 32 End Plate Gasket 231-283
33 Motor Clamp Washer (2) 227-207
34 Hammer Frame Assembly 2131-A703
35 Hammer Pin (2) 231-704
36 Hammer Frame Rear Washer 231-706
37 Hammer (2) 2131-724
38 Hammer Case Assembly 131-A727-70
38A Hammer Case Pilot 405-800
• 39 Hammer Case Gasket 230-36
40 Hammer Case Bushing 705-941
41 Hammer Case Cap Screw (3) 131-638
41A Hammer Case Lockwasher (3) 131-637
43 Anvil Assembly (with pin-type retainer) 231B-726
• 44 Socket Retaining Plunger 804-716
• 45 Plunger Spring 5UHD-718
46 Nameplate 2705P1-30l
* Tube of Grease 405-MG1
* Lube Injector 230-228
* Bottle of Oil 405-M01
* Tune-up Kit (includes illustrated parts 4 (2), 6, 7, 13, 14, 23,
24, 25, 29, 32, 39, 44, 45) and (non-illustrated part R1-75) 2705-TK3
* Not illustrated.
• Indicates Tune-Up Kit part.