04581708_ed4
EN-1
EN
Product Safety Information
Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrenches Product Safety Information
Manual Form 04580361.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Model
Drive Free
Speed
Recommended
Torque Range
Sound Level dB (A)
(ISO15744)
Vibration Level
(ISO8662)
Size
rpm
ft-lb (Nm)
† Pressure (L
p
) ‡ Power (L
w
)
m/s²
1215Ti 1/4”
225
5-25 (7-34)
89.5
100.5
2.8
1225Ti 3/8”
225
5-25 (7-34)
89.5
100.5
2.8
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16586323 and table on page 2. Maintenance frequency is shown in
circular arrow and defined as h=hours, d=days, and m=months. Items identified as:
1. Air filter
7. Coupling
2. Regulator
8. Safety Air Fuse
3. Lubricator
9. Oil
4. Emergency shut-off valve 10. Grease - through fitting
5. Hose diameter
11. Grease - through fitting
6. Thread size
12. Grease - Disassemble gearing and lubricate components
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest
Ingersoll Rand
Office or Distributor.