Ingersoll-Rand 10/125, Operating & Maintenance Manual

Page: 129 / 133

Options Operating & Maintenance Manual
22442594 129
Prior to Starting
Check the lubricator oil level and replenish as necessary.
Maintenance
Check the lubricator oil level and replenish as necessary.
Fault Finding
Options - Dual Pressure
Safety
WARNING
!
Any pneumatic equipment that is, or may be connected to the machine
must be suitable for use with at least the higher, rated pressure.
Operating instructions
Commisioning
Check that switch and solenoid are functioning correctly.
Switch handle up: Lower pressure selected
Switch handle right: Higher pressure selected
Starting and Use
Select higher pressure setting with valve handle (handle to right) and start machine normally.
If lower pressure is required then turn handle to up position.
Toggle between high and low pressure as required.
FAULT CAUSE REMEDY
No oil flow. Incorrect connection Reverse the nylon tube
connections to the
lubricator.