Ingersol Rand IQV20, User Manual

Page: 10 / 112

EN-4 47644658001_ed1
EN
● The BC1120 is a Class A product. In a residential, commercial or light industrial environment it may cause radio interference. This product
is not intended to be installed in a residential environment; in a commercial and light industrial environment with connection to the public mains
supply, the user may be required to take measures to reduce interference.
●
This product is not intended to be used by travelers.
For additional information, refer to Battery Charger Safety Information Manual Form 10567832 and Battery Safety Information Manual
Form 10567840.
Manuals can be downloaded from ingersollrandproducts.com.
Product Specifications
Model Input Output
Battery
Model Number Voltage Rated Capacity Type
BC1120
BC1121
100-240V AC ~ 50/60Hz,
100W, 160-215VA
21V DC (BC1120),
12.6V/21V DC (BC1121), 4.0A
USB Type A, 5V DC, 500mA
D+/D- Connected, 200Ω
BL2010 20V 3.0 Ah Li-Ion
BL2012 20V 2.5 Ah Li-Ion
BL2022 20V 5.0 Ah Li-Ion
Instructions for Charging Battery
The charger shall be installed near a socket-outlet that is easily accessible.
Do not charge battery pack when temperature is below 32°F (0°C) or above 113°F (45°C). Completely charge new battery packs before using. Charg-
ing time is approximately 60-90 minutes.
Unplug charger and remove battery pack when not in use.
Action Condition
Charger Display
Alarm
(Sound)
Fuel
Gauge
Green Red
Plug charger into 100-240V AC
power outlet.
Power On (Stand-By).
l m - mmmm
Insert battery pack into charger. Charging.
Fuel gauge will indicate state of charge.
l m -
ä mmm
Ê
Communications Failure.
Battery Identification / Read Fault
Reinsert battery. Battery may be defective.
m l Low
♪
mmmm
Initial Temperature.
Charging paused until battery has returned to safe temperature.
m
2 x
ä
Low ♪
mmmm
Time Out.
Charge time exceeded. Battery may be defective.
m 3 x
ä
Low
♪
mmmm
In Cycle Temperature.
Charging paused until battery has returned to safe temperature.
m 4 x
ä
Low
♪
mmmm
Over Voltage.
High voltage detected. Battery may be defective.
m 5 x
ä
Low
♪
mmmm
Over Current.
High current detected. Battery may be defective.
m
6 x
ä
Low ♪
mmmm
Remove battery pack. Charge Completed.
l m
High
♪ ♪ ♪
llll
Legend:
ä
Flash l On m Off
Routine Maintenance
Unplug charger before cleaning. Plastic surfaces should only be cleaned with a slightly damp cloth. Keep vents free of dust and debris.
Charger should not be used with a damaged cord. Replacement cords and labels are available at nearest authorized Ingersoll Rand Service Center.
Refer all communications to nearest Ingersoll Rand Office or Distributor.
Environmental Protection
When life of Ingersoll Rand electrical product has expired, it must be recycled in accordance with all applicable standards and regulations (local,
state, country, federal, etc.). Improper disposal may endanger environment.
Symbol Identification
Li-Ion
Return waste material for recycling. Do not dispose of this product with
household waste material.
Product contains Lithium-Ion. Do not dispose of
this product with household waste material.
Original instructions are in English. Other languages are a translation of the original instructions.