SKYZER TECHNOLOGIES
PAGE 137 OF 140
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
NOTE:
For best performance use only heat sensitised paper roll approved by
Ingenico. The use of non-approved paper is likely to damage the terminals
printer
10.8 Installing a Paper Roll
•
Open the paper compartment by lifting the catch located at the rear of
the terminal and pull the cover to the rear of the terminal.
•
Insert the paper roll in the compartment following the directions shown in
the picture
•
Pull the paper up to the top of the terminal • Hold the paper and close
the lid
•
Press simultaneously on both upper corners of the paper flap, as shown
by arrows on picture, until it clips into position
NOTE:
When a new paper roll is inserted, tear off the first length (one complete
turn) to avoid printing on the residue of the adhesive tape.
