Ingenico iWL 250 series Set-Up Guide
Page
1
of
5
CONNECTING/INITIALIZING THE TERMINAL
Connect power and Ethernet cables into terminal base
Place terminal on base
Terminal will begin associating.
When Parameter needed appears:
Press F
Press 0 -Telium Manager
Press 3 - Initialization
Press 2 -Hardware
Press 3 - Cradle Set-up
Press 1 - Association
Press 1 -New Base
When complete -Association Successful / Base Update
appears and Bluetooth indicator (B) will be blue
Press Cancel
INTERNET SETUP
Press F
Press 0 -Telium Manager
Press 3 -Initialization
Press 2 –Hardware
Press 2 -Ethernet Setup
Press 1 -Boot Proto
Press 2 –DHCP
The LAN Status indictor should be green for Static
LOADING & CHANGING THE PAPER ROLL
Pull tab on paper roll cover to release and open cover
Place the paper roll in the compartment as shown
SETTING ADMIN PASSWORD
Press
ADMIN
to access the Admin menu
Press 3 for
SET-UP
Press 3 for
SYSTEM SET-UP
Enter default Admin password 000000, press OK
Enter new Admin password
Confirm new Admin password
The Ingenico iWL250 is a wireless terminal with dial back-up.
It supports WIFI connectivity with Rogers, Telus and Bell
Menu Layout
To power on/off remove from base and
simulataneously hold down the
yellow
and
.,#*
buttons.
The Ingenico iWL 250 menu functions
are arranged in two menus:
Transaction
and
Administration
.
To access letters on the numeric keypad,
double click the letter key quickly until
the desired number appears.
Use yellow button to go back one step
and red button to cancel.
Terminal / Keypad Layout
Terminal Base
Merchant Router
