Intégration Guide_iUI120
52/58
Copyright © 2013 Ingenico
900016253 R11 000 01/1416
All rights reserved
7 MAINTENANCE
7.1 CONFIGURATION
The iUI120 unit supplied to you has operational configuration loaded.
In factory, software is loaded in the iUI120, as well as parameter definition files.
The parameter definition file of the UCMC component is used, in particular, to
determine the type of printer used (local/host) and the position of the host (COMx).
To change configuration, you must load a new parameter definition file (supplied by
Ingenico).
This operation can be performed using the LLT or a USB key (see § Loading by USB
key)
For more information concerning configuration, contact Ingenico Technical Support.
7.2 OPERATING LIFE
Minimum operating life of 5 years.
8 CLEANING INSTRUCTIONS
The external front face should be carefully cleaned on a regular basis.
The goal is to keep the display and the keyboard free of dirt and solvents.
First of all, unplug all the wires from the terminal during this operation.
Good rules for proper cleaning of the terminal are:
•
Use a soft cloth that is very slightly soaked with soapy water to clean the
outside of the terminal.
•
The glass has special surface treatment but must be carefully clean.
•
Do not clean the electrical connections.
•
Do not use in any case, solvents, detergents or abrasive products:
Those materials might damage the plastic or electrical contacts.
•
Avoid also the use of pressurized liquids.
•
Avoid exposing the terminal to the direct rays of the sun.
