IMP400
7/15
Copyright © 2014 Ingenico
900021684 R11 000 01/0615
All rights reserved
3.3.
EC standard compliance
EC standard compliance marking certifies that the product stipulated below:
iSMP2 Companion associated to iMP400
Conforms to the following harmonized standards:
Safety standards:
-
EN 60950-1:2006/ A1:2010/A11 :2009/A12 :2011
-
IEC 60950-1 :2
nd
ed./A1:2009
EMC standards
-
EN 301 489-1 v1.9.2/ EN 301 489-17 v2.1.1
-
EN 55022:2006/A1:2007/EN 55024:2011
Radio
-
ETSI EN 300 328 v1.8.1
The CE marking indicates IMP400 complies with the requirements of European
Directive 1999/5/EC of 9 March 1999 on Radio and Telecommunications Terminal
Equipment for:
o
The protection of the health and the safety of the user and any other person.
o
The protection requirements with respect to electromagnetic compatibility.
And complies with harmonised standards listed above.
3.4.
FCC and IC compliance
This product is registered to the Federal Communication Commission under reference:
FCCID: XKB-IMP40C.
Compliance Statements:
FCC:
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
IC:
This class (B) digital apparatus complies with Canadian ICES-003.
