Copyright© 2022 Ingenico -
Banks and Acquirers
International Holding SAS
All rights reserved
13
AXIUM RX7000 /1022
4.
Installation & Connections
4.1
Positionning the terminals
Place the terminal with an easy access to an electrical outlet. Place the
terminal away from any heat source and protected from dust, vibrations
and electromagnetic radiations (away from video terminals, PC, anti-
shoplifting barriers ...). The terminal is exclusively made for indoor use.
The AXIUM RX7000 device may be mounted on a flat surface, wall, or
customer stand.
Stylus(Optional)
Front Camera
Volume key
5.5 inch touch screen
3.5mm Audio Jack
Contactless Reader
Keypad
Smartcard Reader
Magnetic Stripe Reader
Shimmer detection
IDMI connector
Speaker
Stand fixation (UPM)
Rear Camera (optional)
Micro SD Card
SAM Card 1 & 2
Do not place the AXIUM RX7000 device on a PC
monitor, adjacent to an electronically active security tag
deactivation system, or near other sources of magnetic
fields.
CAUTION
The AXIUM RX7000 device must be at least 30 centimeters (12
inches) away from an electronically active type of security tag
deactivation pad.
An electronically active system sends out a powerful and potentially
disruptive signal to deactivate the security tag. If the AXIUM
RX7000 device is placed too close to the system’s pad, or placed
above the pad, the product may not work properly.
A passive system is a permanent magnet type that does not send
out a signal. This type should not affect the AXIUM RX7000 device.
